K EYENAB L E R - Keypad anti theft monitoring system

Wireless relay hidden between starter and power supply

􀂾 Keypad, RFID card or keychain fob enables wireless relay

􀂾 Can NOT “hot wire” at key-switch---prevents most theft

􀂾 Keeps untrained, unauthorized operators from starting

􀂾 Logging option for usage, hr meter, maintenance code expiration

􀂾 (also available with wired relay—starts directly from keypad

K I S S Passive RFID Card Enabling System

􀂾 Wireless relay hidden in ignition or fuel pump circuit

􀂾 Uses standard or HID card to enable (accepts up to 1000)

􀂾 Driver flashes card over reader in dash—lighting green LED

􀂾 Wireless relay is enabled allowing key to start vehicle

􀂾 Illuminated button start or NO-button key-start versions

􀂾 Logging option for usage, hr meter, maintenance code expiration

􀂾 (also available in wired/wireless relay—starts directly from button

GENI E Long Distance RFID Card Enabler

􀂾 Wireless relay hidden in ignition or fuel pump circuit

􀂾 Battery powered RFID card (1 plus 1 spare in card)

􀂾 RFID card kept in driver’s wallet (accepts up to 5)

􀂾 When driver walks in range, wireless relay auto enables

􀂾 Driver starts vehicle with key or lever switch

FOB Keychain Fob Enabler

􀂾 Wireless relay hidden in starter circuit

􀂾 Battery powered keychain FOB (up to 4 FOBS)

􀂾 Driver presses FOB button to wirelessly enable relay

􀂾 Driver starts vehicle with key or lever switch

B IO-TOUCH Fingerprint Reader and Enabler

􀂾 Wireless relay hidden in ignition or fuel pump circuit

􀂾 Fingerprint reader mounted on dash

􀂾 Accepts up to 10 drivers/fingers

􀂾 After finger swipe is accepted, wireless relay is enabled

􀂾 Allowing key to start vehicle 

LCD Vehicle Monitoring System

􀂾 Top of the line full featured vehicle monitoring –start from keypad!

􀂾 Can use wired or wireless relay for keyless or anti-theft

􀂾 LCD screen interface allows for checklist automation

􀂾 Impact, speed sensors and auxiliary sensors

􀂾 Records all event log data and wireless transmission

Anti-theft Wireless Relay Models: 

This is a pro-active, pre-emptive approach to theft prevention!

How the wireless relay protects your vehicle from theft: The wireless relay is wired and discretely hidden in starter circuit (Keyenabler, LCD, KISS or FOB units) or in the ignition or fuel pump circuit

(Fingerprint Bio or Genie Card units). Depending upon the model, the device enables a hidden wireless relay by a code, button, finger or RFID card. “Hot wiring” of the vehicle is prevented because the wireless relay must first be enabled in order to start at the ignition key. Unable to use a key or unable to “hot wire”; a thief is likely to give up frustrated and move on to easier prey.

Keyless ignition Wired Relay Models:   Are available in the KEYTROLLER, KISS and LCD models.  The wired relay module is wired directly to the ignition switch allowing the operator to start directly from the keypad or illuminated button---eliminating keys altogether.  Available with a real time clock, logging, hour meter, impact---speed—engine—seat switch---seat belt sensing and wireless connectivity

for easier programming and event log downloading.

Installation:   Any system can be installed on gasoline, LPG, diesel and electric vehicles of all makes and models. Some models (Genie, Fingerprint-Bio + FOB) take only minutes to install.

Different vehicle types and models in your fleet ?   Some OEM manufacturers offer anti-theft devices for their equipment. Problem is, most equipment users have a wide variety of makes and models from different manufacturers. Our products will fit to ANY equipment you have!! Therefore, you only need one supplier, one set of programming instructions etc for ALL of your equipment.

One security system type significantly simplifies your fleet protection.

Safety:   All models require a card or code to allow a driver to start a vehicle. If the driver is not trained and authorized to operate the vehicle---his code or RFID card is simply not programmed into the vehicle. KEYENABLER, KEYTROLLER and KISS models also allow for code/card expiration---alerting management to schedule recurrent training. Check on model for # of drivers per vehicle.

Logging:   KEYENABLER keypad,  KEYTROLLER, LCD and KISS models are available with advanced features like PC programming of codes/cards and settings and downloading of event log data. Our PC software will allow filtering and graphing of events to evaluate usage and productivity (by machine or by\ operator). Wireless radio options are also available.