 Frames
|
 |
| No. 1 - Straight back frame for general use. |
|
| |
 |
| No. 2 or B w/vertical strap - Straight lattice back frame allows smaller
packages to be delivered. |
|
| |
 |
| No. 3 - Curved lattice back frame for carrying both cylindrical and flat loads. |
|
| |
 |
| No. 4 - Straight back frame w/ molded cross members for general use. |
|
| |
 |
| No. 5 - Curved back frame w/ molded cross members for transporting cylinders
and kegs. |
|
| |
 |
| No. 6 - Straight and curved back molded frame. Ideal for transporting cases on
top of kegs. |
|
| Noses
|
 |
| Type A - Cast aluminum or magnesium, 14" wide, 7.5" deep, recessed
heel. |
|
| |
 |
| Type C - Extruded aluminum, 14" wide, 7.5" deep, recessed heel w/
cutouts. Flush w/o cutouts, 9" deep. Cannot be used with a deck. |
|
| |
 |
| Type C - Steel - Steel Nose, 14" wide, 7.5" deep, Recessed heel with
cutouts. 14" wide, 9" deep. Flush without cutouts. |
|
| |
 |
| Type D - Extruded aluminum, 18" wide, 7.5" deep, recessed heel w/
cutouts. Flush w/o cutouts, 9" deep. Cannot be used with a deck. |
|
| |
 |
| Type D - Steel - Steel Nose, 18" wide, 7.5" deep, Recessed heel with
cutouts. 18" wide, 9" deep. Flush without cutouts. |
|
| |
 |
| Type H - Cast magnesium, 14" wide, 12" deep, recessed heel. |
|
| |
 |
| Type J - Extruded aluminum, 16" wide, 12" deep, flush frame mount
only. 6" high back. Cannot be used with a deck. |
|
| |
 |
| Type N - Narrow aisle bottom mount nose, 14" wide, 7.5" deep. |
|
| |
 |
| Type U - Cast aluminum or magnesium, 18" wide, 7.5" deep, recessed
heel. |
|
| Loop
Handles |
 |
| No. 11 - Standard "U" loop handle. Very easy to use. |
|
| |
 |
| No. 12 - Basic loop handle with brace. |
|
| |
 |
| No. 18 - "U" handle w/ 4" additional length on vertical loop for
Hi-U extension. |
|
| |
 |
| No. 19 - "U" loop handle w/ vinyl sleeve. Helps prevent fatigue. |
|
| |
 |
| No. 22 - "U" handle w/ vinyl sleeve and "U" brace. (shown
with 52" frame extension option) |
|
| |
 |
| No. 24 - Standard loop handle w/ straight top surface. |
|
| Single
Grip Handles |
 |
| No. 13 - Straight loop w/ cross brace and welded pin handle. Available in
52", 55", and 60" heights. |
|
| |
 |
| No. 13a - High loop w/ curved cross brace and welded pin handle. Available in
55" and 60" heights. |
|
| |
 |
| No. 14 - Horizontal loop, single pin with additional hand holds. |
|
| |
 |
| No. 15 - Vertical loop handle fits No. 1, 4, 5, 6 frames (Call your dealer). |
|
| |
 |
| No. 15a - Vertical loop handle for B and No. 2 frames. |
|
| |
 |
| No. 15b - Vertical loop for HI-U extension frames. |
|
| |
 |
| No. 15c - Used for brake trucks. Vertical loop on a curved cross brace. |
|
| |
 |
| No. 17 - Straight loop handle w/ welded pistol grip on top. |
|
| |
 |
| No. 17a - Straight loop handle w/ foam sleeves. |
|
| |
 |
| No. 17b - Used for brake trucks. High loop handle w/ brake stub. |
|
| |
 |
| No. 40 - Welded dual grip with vertical post and anti-slip foam sleeves. |
|
| Double
Grip Handles |
 |
| No. 16 - Standard double pistol grip handle. |
|
| |
 |
| No. 25 - Double vertical loop. Available in 52", 55", and 60"
heights. |
|
| |
 |
| No. 30 - Welded double grip handle. Available in 52" height. |
|
| |
 |
| No. 35 - Bolted dual grip, 62" height. |
|
| |
 |
| No. 36 - Bolted dual grip handle w/ vertical post. |
|
| |
 |
| No. 45 - Welded dual grip w/ vertical post and anti-slip foam sleeves.
Available in 62" height. |
|
| Wheels
|
 |
| No. 1010 - 10" Microcellular foam tire never goes flat and performs like a
pneumatic tire. |
|
| |
 |
| No. 1035 - One-piece hub, 10" pneumatic tires w/ ball bearings. |
|
| |
 |
| No. 1040 & 1045 - Bolted two-piece hub on 10" pneumatic tires and ball
bearings. 1045 - Comes with roller bearings. |
|
| |
 |
| No. 1050 - Easier rolling, longer life and greater shock absorption. 3-piece
hub has less bearing maintenance and longer bearing life. |
|
| |
 |
| No. 815 - 8" moldon rubber on cast aluminum hub w/ ball bearings. |
|
| |
 |
| No. 825/1025 - One-piece hub with 8" or 10" semi-pneumatic tires with
ball bearings. |
|
| |
 |
| No. 830/1030 - Strong, one-piece polyolefin hub with 8" or 10" easy
rolling, shock absorbing balloon cushion tires. |
|
| |
 |
| No. 850 - 8" Pneumatic tires with ball bearings and two-piece hub. |
|
| Stair
Climbers |
 |
| C1 - Heavy duty cast aluminum sliders. Great for moving over curbs and on
stairs. Not available on Gemini Jr. |
|
| |
 |
| C5 - Cast aluminum sliders with replaceable low-friction polymer skid bars.
Tough, quiet and long lasting. Not available on Gemini Jr. |
|
| Folding
Noses |
 |
| No. F1 - 24" Low-profile formed plate extension. This nose is incompatable
with snap on decks. (300 lbs. capacity) |
|
| |
 |
| No. F2 - Extruded aluminum channel extension. 20" length. |
|
| |
 |
| No. F3 - Extruded aluminum channel extension. 30" length. |
|
| |
 |
| Recessed Folding Nose - Requires special frame, call your dealer. 22" long
tubular aluminum. |
|
| Frame
Extensions |
 |
| No. 52/55/60/68 - Hi-U frame extensions accomodate taller loads. Available in
52", 55", 60" and 68" heights. |
|
| Accessories
|
 |
| Delivery Organizer - Strong molded polymer w/ textured surface and bottom
drainage. Quickly clips in place. |
|
| |
 |
| Door Stop - Fits all Magliner hand trucks and Gemini convertable hand trucks. |
|
| |
 |
| Keg Hook - No. 5 and No. 6 frames. Two hooks available; one for barrel shaped
and odd sized kegs, and one for straight kegs. The hook swings out of the way when not in
use. |
|
| |
 |
| Padded Hi-U Brace Cover - Protective foam pad cushions arms and shoulders,
reduces injuries and may reduce down time and associated costs. |
|
| |
 |
| Paddle Brake Kit - Brake assembly kit for two-wheel hand trucks. |
|
| |
 |
| Personalization Stripes - Tough, durable plastic stripes promote company and
products. |
|
| |
 |
| Retractable 4th Wheel - Retractable 5" caster wheels support load in
incline position. Folds flush against frame when not in use. |
|
